All Categories
    Find my Machine Setup
    Model Not Listed?

    Dosko 620 8 Tooth 3/8" Wide Wheel

    CEI OEM Setup

    Recommended Series
    Quantity of Teeth L,R,S
    2 Left, 2 Right,4 Straight
    Qty of Pockets
    4 CounterSunk, 4 Fine Thread
    Recommended Bolts
    60032.CEI 1.75" long

    GREENTEETH OEM Setup

    Recommended Series
    Quantity of Teeth
    8
    Qty of Pockets
    4 Angled, 4 Straight, - Reverse
    Recommended Bolts(GreenTeeth P/N)
    783555.DOS (LP-134) 1.75 " long
    Filters
    Preferences
    Search
    Manufacturer: Greenteeth

    Greenteeth® 700 Series | Deep Dish Red Stump Grinder Tooth w/Nut

    $8.99
    Three-position rotatable tooth – it’s like having three teeth in one! The Greenteeth® design is unique in that the tooth can be quickly rotated three times to give your machine three sharp cutting edges before the tooth needs to be sharpened. The 700 Series Red Deep Dish tooth is more aggressive and has a more deep concave edge compared to the Green Standard Dish. These teeth are a better choice for rocky soil conditions where there is LESS THAN 25% rock in the ground. The 700 series are appropriate for units with 20 - 45 HP.
    SKU: 783558-700R.GRE

    The 700 Series Red Dish tooth is more aggressive and has a more deep concave edge compared to the Standard Dish.  These teeth are a better choice for rocky soil conditions where there is LESS THAN 25% rock in the ground. Greenteeth® 700 series teeth are designed to fit on 500 series Greenteeth® pockets only

    Greenteeth® are manufactured in the USA using specifically formulated carbide to offer a high-quality tooth with a long cutting life. Greenteeth® is a unique Stump Grinder tooth and pocket system that gives you the ability to rotate the tooth itself, providing a fresh cutting edge in a matter of seconds. The tooth can be rotated using only a standard wrench and without having to remove the pocket! Since each tooth can be rotated to a new edge three times, it is like having three teeth in one! In the same way, any tooth can be easily moved to any pocket position on the wheel, thus allowing even more cutting life from each tooth.

    A tough carbide concave “dish” as a cutting edge is the innovative design that allows Greenteeth® the ability to actually “shear” rather than “shred”. The shearing is a smoother motion that requires less power exertion from the machine and allows faster, more efficient stump cutting.

    Recommendations: GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

    Specifications:

    • Series: 700 Series

    • Type: Red, Deep Dish

    • Wrench Size: 9/16″

    • Torque: 25 ft. lbs. 

    • Pocket Compatibility: For use with 700 Series pockets only

    Products specifications
    Manufacturer Greenteeth
    Series Type Greenteeth 700 Series
    SKU Number 783558-700R
    Stump Grinder Size (HP) 20-45
    Wrench Size 9/16"
    Nut Size 3/8" x 16
    Carbide 3/4"
    Bolt Torque 180-240
    Nut Torque 25 ft lbs
    Shipping Weight N/A

    The 700 Series Red Dish tooth is more aggressive and has a more deep concave edge compared to the Standard Dish.  These teeth are a better choice for rocky soil conditions where there is LESS THAN 25% rock in the ground. Greenteeth® 700 series teeth are designed to fit on 500 series Greenteeth® pockets only

    Greenteeth® are manufactured in the USA using specifically formulated carbide to offer a high-quality tooth with a long cutting life. Greenteeth® is a unique Stump Grinder tooth and pocket system that gives you the ability to rotate the tooth itself, providing a fresh cutting edge in a matter of seconds. The tooth can be rotated using only a standard wrench and without having to remove the pocket! Since each tooth can be rotated to a new edge three times, it is like having three teeth in one! In the same way, any tooth can be easily moved to any pocket position on the wheel, thus allowing even more cutting life from each tooth.

    A tough carbide concave “dish” as a cutting edge is the innovative design that allows Greenteeth® the ability to actually “shear” rather than “shred”. The shearing is a smoother motion that requires less power exertion from the machine and allows faster, more efficient stump cutting.

    Recommendations: GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

    Specifications:

    • Series: 700 Series

    • Type: Red, Deep Dish

    • Wrench Size: 9/16″

    • Torque: 25 ft. lbs. 

    • Pocket Compatibility: For use with 700 Series pockets only

    PRICE BREAKS - The more you buy, the more you save
    Quantity
    1+
    25+
    100+
    Price
    $8.99
    $8.77
    $8.54
    Products specifications
    Manufacturer Greenteeth
    Series Type Greenteeth 700 Series
    SKU Number 783558-700R
    Stump Grinder Size (HP) 20-45
    Wrench Size 9/16"
    Nut Size 3/8" x 16
    Carbide 3/4"
    Bolt Torque 180-240
    Nut Torque 25 ft lbs
    Shipping Weight N/A
    Product tags