CEI Square Shank | 2-7/8" Stump Grinder Tooth w/Lock Nut

CEI Square Shank | 2-1/2" Stump Grinder Tooth w/Lock Nut

64031.CEI

From $9.99

The Square Shank series stump grinder teeth come standard with a Grade 8 Lock Nut so you can get to work at once. The thick square section of the teeth and large lock nuts provide more surface contact and uniform cutting.

CEI Square Shank | 2-7/8" Stump Grinder Tooth w/Lock Nut

64051.CEI

From $9.99

The Square Shank series stump grinder teeth come standard with a Grade 8 Lock Nut so you can get to work at once. The thick square section of the teeth and large lock nuts provide more surface contact and uniform cutting.

Front view of the 1100 series wearsharp tooth; with nut

Greenteeth® Wearsharp™ 1100 Series: Stump Grinder Tooth w/Nut

783558-1100WS.GRE

$13.95

Wearsharp™ 1100 series teeth are larger than the 900 series and have an innovative design allowing them to retain a sharp cutting surface over time! This increases the lifespan and durability of each tooth. These teeth utilize the pockets of their corresponding 1100 series.

Front view of a 500 series deep dish red tooth; with nut

Greenteeth® 500 Series | Deep Dish Red Stump Grinder Tooth w/Nut

783557-1.DOS

$6.95

Three-position rotatable tooth – it’s like having three teeth in one! The Greenteeth® design is unique in that the tooth can be quickly rotated three times to give your machine three sharp cutting edges before the tooth needs to be sharpened. The 500 Series Red Deep Dish tooth is more aggressive and has a more deep concave edge compared to the Green Standard Dish. These teeth are a better choice for rocky soil conditions where there is LESS THAN 25% rock in the ground. The 500 series are appropriate for smaller units in the market, typically under 20hp.

CEI 500 Series | Left Stump Grinder Tooth

5003.CEI

From $6.11

The versatile 500 Series teeth have a 1/2" x 1/2" shank allowing them to fit in standard 1/2" x 1/2" pockets. The pocket does not need to be removed to change the teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts to the manufacturer's specifications. They feature a tungsten carbide tip and are available in left, straight, and right versions.

CEI 500 Series | Right Stump Grinder Tooth

5002.CEI

From $6.11

The versatile 500 Series teeth have a 1/2" x 1/2" shank allowing them to fit in standard 1/2" x 1/2" pockets. The pocket does not need to be removed to change the teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts to the manufacturer's specifications. They feature a tungsten carbide tip and are available in left, straight, and right versions.

Front view of a 500 series standard dish green tooth; with nut

Greenteeth® 500 Series | Standard Dish Green Stump Grinder Tooth w/Nut

783557.DOS

$6.95

Ideal for rocky soil conditions! Three-position rotatable tooth – it’s like having three teeth in one! The Greenteeth® design is unique in that the tooth can be quickly rotated three times to give your machine three sharp cutting edges before the tooth needs to be sharpened. The 500 Series Green Standard Dish tooth has a concave that is a bit shallower compared to the Red Deep Dish and is a better choice for rocky soil conditions. The 500 series are appropriate for smaller units in the market, typically under 20hp.

CEI 500 Series | Straight Stump Grinder Tooth

5001.CEI

From $6.11

The versatile 500 Series teeth have a 1/2" x 1/2" shank allowing them to fit in standard 1/2" x 1/2" pockets. The pocket does not need to be removed to change the teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts to the manufacturer's specifications. They feature a tungsten carbide tip and are available in left, straight, and right versions.

Front view of a 700 series wearsharp tooth

Greenteeth® Wearsharp™ 700 Series | Stump Grinder Tooth w/Nut

783558-700WS.GRE

From $8.95

Wearsharp™ Teeth are larger than the 500 series and have an innovative design allowing them to retain a sharp cutting surface over time! This increases the lifespan and durability of each tooth. These teeth utilize the pockets of their corresponding 700 series.

CEI 800 Series | Left Stump Grinder Tooth

8003.CEI

From $11.97

The CEI 800 Series teeth feature a patented cutting angle which is similar to a saw blade. It produces a slicing action compared to the impacting/tearing action of competitor's teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. The pocket does not need to be removed to change teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts. The CEI 800 Series teeth are available in left, right, or straight.

CEI 800 Series | Right Stump Grinder Tooth

8002.CEI

From $11.97

The CEI 800 Series teeth feature a patented cutting angle which is similar to a saw blade. It produces a slicing action compared to the impacting/tearing action of competitor's teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. The pocket does not need to be removed to change teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts. The CEI 800 Series teeth are available in left, right, or straight.

CEI 800 Series | Straight Stump Grinder Tooth

8001.CEI

From $11.97

The CEI 800 Series teeth feature a patented cutting angle which is similar to a saw blade. It produces a slicing action compared to the impacting/tearing action of competitor's teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. The pocket does not need to be removed to change teeth. Simply loosen the bolts, remove existing teeth, replace them with new teeth and retorque the bolts. The CEI 800 Series teeth are available in left, right, or straight.

CEI 800V Series | Left Stump Grinder Tooth

80033.CEI

From $11.97

Designed for Vermeer stump grinders, CEI 800V Series teeth share the same patented cutting angle as the CEI 800 Series. Similar to a saw blade, it produces a slicing action rather than the impacting/tearing action of competitors' teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. Unique to the 800V series is there ability to lock securely into Vermeer's Pro-Series stump grinder pockets. The CEI 800V Series teeth are available in left, right or straight.

CEI 800V Series | Right Stump Grinder Tooth

80022.CEI

From $11.97

Designed for Vermeer stump grinders, CEI 800V Series teeth share the same patented cutting angle as the CEI 800 Series. Similar to a saw blade, it produces a slicing action rather than the impacting/tearing action of competitors' teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. Unique to the 800V series is there ability to lock securely into Vermeer's Pro-Series stump grinder pockets. The CEI 800V Series teeth are available in left, right or straight.

CEI 800V Series | Straight Stump Grinder Tooth

80011.CEI

From $11.97

Designed for Vermeer stump grinders, CEI 800V Series teeth share the same patented cutting angle as the CEI 800 Series. Similar to a saw blade, it produces a slicing action rather than the impacting/tearing action of competitors' teeth. A tungsten carbide tip is silver soldered in place and protected by the stone collar. Unique to the 800V series is there ability to lock securely into Vermeer's Pro-Series stump grinder pockets. The CEI 800V Series teeth are available in left, right or straight.