Knives

Brush Chipper Knives

Brush chipper knives are machine knives designed to chip down brush material. These brush chipper knives can vary greatly in size and type. But, they process wood in a way more precise than your standard grinder. Want to learn more? Contact CEI Supply.

Simonds Brush Chipper Knives are manufactured to OEM standards using the same modified A8 chipper knife steel used in making their sawmill and pulp mill chipper knives. Simonds found that using this material has the best balance of abrasion resistance, cutting edge retention and impact resistance of any material they have identified. Their Big Rapids facility has a first-rate heat treat process that can allow Simonds to control the hardness of the cutting edge while maintaining the softer, more ductile, center very accurately.

DK2 Series Brush Chipper knives are now also available.

View as Grid List

Sort by

Display per page

DK2 Series | Chipper Blade w/Hardware |12"

OPC50636

From $64.39

BLADE Dual edge reversible, beveled for green and dry wood cutting.

Length: 12"
Width: 2-1/8"
Thickness: 3/8"
Hole Size: 7/16"
# of holes: 5
Bevel angle: 34 Degrees

Front and side view of the Simonds brush chipper knife

Simonds Brush Chipper Knife | 10" x 5-1/2" x 5/8"

19100250.SIM

From $80.03

Length: 10"
Width: 5-1/2"
Thickness: 5/8"
# of holes: 5
Bevel angle: 30 Degrees
Weight: 7.35 lbs

Used on:
Bandit: 1290H, 1590, 1890 and 2090 (uses 5/8"" hardware)
Note: This knife is used on machines manufactured after November 1999.

Simonds Brush Chipper Knife | 10-1/2" x 5" x 1/2"

19103260.SIM

From $82.79

Length: 10-1/2"
Width: 5"
Thickness: 1/2"
# of holes: 4
Bevel angle: 31 Degrees
Weight: 5.80 lbs

Used on:
Morbark: 2, 5, 7, 10, 12, 13, 17, 2050, 2060, 2070 (& XL Twister), 2200, 2211, 2400 (& XL Hurricane), 20/36 (New Holder), 50/36 and 60/36.

Simonds Brush Chipper Knife | 10-1/2" x 5" x 5/8"

80870.SIM

From $87.39

Length: 10-1/2"
Width: 5"
Thickness: 5/8"
# of holes: 4
Bevel angle: 31 Degrees
Weight: 6.86 lbs

Used on:
Morbark: 14, 15, 18 & 2400.

Simonds Brush Chipper Knife | 6.5" x 2.265" x .375"

790006.DOS

From $59.33

Length: 6.5"
Width: 2.265"
Thickness: .375"
# of holes: 4
Bevel angle: 40 Degrees
Weight: 4 lbs

Used on:
Dosko: 13-21T-13H

Simonds Brush Chipper Knife | 7-1/4" x 4" x 1/2"

19071660.SIM

From $50.59

Length: 7-1/4"
Width: 4"
Thickness: 1/2"
# of holes: 3
Bevel angle: 31 Degrees
Weight: 3.05 lbs

Used on:
Bandit: 100XP, 150XP, 200XP, 200+, 250XP, 280XP, 1200, 1250, & 1400
Note: This knife is used on machines manufacturered before June 2000.

Simonds Brush Chipper Knife | 7-1/4" x 4" x 3/8"

19071640.SIM

From $45.07

Length: 7-1/4"
Width: 4"
Thickness: 3/8"
# of holes: 3
Bevel angle: 31 Degrees
Weight: 2.40 lbs

Used on:
Altec: 1217 HP & DC 1217
Asplundh: Timberwolf
Bandit Models: 100, 150, 200, & 250
Morbark Models: Eager Beever 100, 200, 290, 2060D Cyclone & 16 Super Beever
Woodchuck Models: Hy-Roller, W/C 17, W/C 19 & D C1217HP

Simonds Brush Chipper Knife | 7-1/4" x 4-1/2" x 1/2"

19071700.SIM

From $55.19

Length: 7-1/4"
Width: 4-1/2"
Thickness: 1/2"
# of holes: 3
Bevel angle: 31 Degrees
Weight: 3.45 lbs

Used on:
Bandit: 150XP, 200XP, 250XP, 254XP, 280XP and 1850
JP Carlton: 2012, 2018D, 2512, and 2512HD