Close
Our Products
    Find my Machine Setup
    Model Not Listed?

    Select your Equipment Type, Manufacturer and Model from the drop downs above.

    Filters
    Preferences
    Search
    Manufacturer: Leonardi

    Tomahawk Series: Bolt - 3-1/4" For 1-1/2" Wheel

    $2.65
    1/2" Hex socket head bolt. 3 ¼” for 1 ½” wheel thickness.
    SKU: B325

    1/2" Hex socket head bolt.  3 ¼” for 1 ½” wheel thickness.

    Specially designed to limit thread, head, and wheel damage.  Shorter, sunken bolts keep both bolt ends protected, while the longer, smooth shank reduces wheel damage by preventing bolt and hole distortion. For use with Tomahawk teeth and pockets only.

     


     

    Tomahawk™: Benefits

    Cutting Rate and Strength

    TOMAHAWK_IMAGE_INFO_TEETH

    Tomahawk™ Teeth boast the highest performance both in cutting rate and strength.

    Why? The Tomahawk™ Teeth's uniquely designed double cutting angle provides strength and durability by slicing through stumps rather than pounding your equipment.

     


     

    Installation

    TOMAHAWK_IMAGE_INFO_INSTALL

    Tomahawk'" Teeth install in under one minute.

    Why? The simple construction of Tomahawk'" Teeth and mounting block eliminates the need for gauging and teeth set-up, which saves time on the job.

     


     

    Cross-Over Configurations

    TOMAHAWK_IMAGE_INFO_CROSSOVER

    Tomahawk'" Teeth come in interchangeable Left, Straight and Right teeth, allowing for Cross-Over Configurations, which are recommended in all-wheel set-ups. There are no special teeth or set-ups required with Leonardi teeth.

    Why? Cross-Over Configurations allow for plunge cutting, which is optimal for efficient stump removal in difficult or confined job environments (buildings, sidewalks, sheds, curbs, etc.).

     


     

    The Mounting Block

    TOMAHAWK_IMAGE_INFO_MOUNTING

    The Tomahawk'" Tooth has reversible mounting blocks which enable installation on either side of the wheel.

    Why? This allows for quick and easy interchangeability of hardware, enabling faster replacement of teeth in the field, and greater efficiency on the job - bolts can be installed from either side of the wheel, wherever there are minimal obstructions (drive unit, guards, pulleys, etc.).

    1/2" Hex socket head bolt.  3 ¼” for 1 ½” wheel thickness.

    Specially designed to limit thread, head, and wheel damage.  Shorter, sunken bolts keep both bolt ends protected, while the longer, smooth shank reduces wheel damage by preventing bolt and hole distortion. For use with Tomahawk teeth and pockets only.

     


     

    Tomahawk™: Benefits

    Cutting Rate and Strength

    TOMAHAWK_IMAGE_INFO_TEETH

    Tomahawk™ Teeth boast the highest performance both in cutting rate and strength.

    Why? The Tomahawk™ Teeth's uniquely designed double cutting angle provides strength and durability by slicing through stumps rather than pounding your equipment.

     


     

    Installation

    TOMAHAWK_IMAGE_INFO_INSTALL

    Tomahawk'" Teeth install in under one minute.

    Why? The simple construction of Tomahawk'" Teeth and mounting block eliminates the need for gauging and teeth set-up, which saves time on the job.

     


     

    Cross-Over Configurations

    TOMAHAWK_IMAGE_INFO_CROSSOVER

    Tomahawk'" Teeth come in interchangeable Left, Straight and Right teeth, allowing for Cross-Over Configurations, which are recommended in all-wheel set-ups. There are no special teeth or set-ups required with Leonardi teeth.

    Why? Cross-Over Configurations allow for plunge cutting, which is optimal for efficient stump removal in difficult or confined job environments (buildings, sidewalks, sheds, curbs, etc.).

     


     

    The Mounting Block

    TOMAHAWK_IMAGE_INFO_MOUNTING

    The Tomahawk'" Tooth has reversible mounting blocks which enable installation on either side of the wheel.

    Why? This allows for quick and easy interchangeability of hardware, enabling faster replacement of teeth in the field, and greater efficiency on the job - bolts can be installed from either side of the wheel, wherever there are minimal obstructions (drive unit, guards, pulleys, etc.).