Close
Our Products
    Find my Machine Setup
    Model Not Listed?

    Select your Equipment Type, Manufacturer and Model from the drop downs above.

    Filters
    Preferences
    Search
    Manufacturer: CEI Supply

    800V Series: Right Tooth

    $8.06
    Designed for Vermeer stump grinders, CEI 800V Series teeth share the same patented cutting angle as the CEI 800 Series. Similar to a saw blade, it produces a slicing action rather than the impacting/tearing action of competitors' teeth. The CEI 800V Series teeth are available in left, right or straight.
    SKU: 80022.CEI

    The CEI 800V Series teeth has a special tungsten carbide tip that is silver soldered in place and protected by the stone collar. The tooth's stone collar protects the carbide from rocks and other debris which can damage carbide. It also provides engineered strength to the tooth-pocket assembly.

    The tooth shank has a circular indent allowing it to lock securely into Vermeer's Pro-Series stump grinder pockets. The shank is approximately .040" thicker than the channel in the pocket so the pocket closes in on the shank to hold it securely. The pocket does not need to be removed to change the teeth. Simply loosen the bolts, remove existing teeth, replace with the new teeth and retorque the bolts to manufacturer's specifications.

    PRICE BREAKS - The more you buy, the more you save
    Quantity
    1+
    6+
    Price
    $8.06
    $7.80
    Products specifications
    Manufacturer CEI
    Series Type CEI 800V Series
    SKU Number 80022
    Orientation Right

    The CEI 800V Series teeth has a special tungsten carbide tip that is silver soldered in place and protected by the stone collar. The tooth's stone collar protects the carbide from rocks and other debris which can damage carbide. It also provides engineered strength to the tooth-pocket assembly.

    The tooth shank has a circular indent allowing it to lock securely into Vermeer's Pro-Series stump grinder pockets. The shank is approximately .040" thicker than the channel in the pocket so the pocket closes in on the shank to hold it securely. The pocket does not need to be removed to change the teeth. Simply loosen the bolts, remove existing teeth, replace with the new teeth and retorque the bolts to manufacturer's specifications.

    How do I tell the difference between left and right teeth?

    Whichever direction the tooth is curving; that is the tooth's type. (see image to the right)

    For Dual 800 Series - Hold the teeth with the carbide tip parallel to the ground (as shown to the right). Whichever direction the tooth is curving, this is the tooth's type.

    Note: Teeth are put in a pocket with the patent number facing outward.

    For 500, 800, 800V and S-Pro Series - Hold the tooth so the cutting tip is facing you and the carbide tip is parallel to the ground (as shown to the right). Whichever direction the tooth is curving; this is the tooth's type.

    For Gladiator Series - There is no left or right teeth as Gladiator teeth can fit on either side of the wheel. Gladiator teeth are instead available in bent or straight. (Third Photo)

    Products specifications
    Manufacturer CEI
    Series Type CEI 800V Series
    SKU Number 80022
    Orientation Right