Close
Our Products
    Find my Machine Setup
    Model Not Listed?

    Select your Equipment Type, Manufacturer and Model from the drop downs above.

    Filters
    Preferences
    Search
    Manufacturer: Greenteeth

    500 Series: Deep Dish Red Tooth w/Nut

    $6.95
    The smallest of the Greenteeth®, the Red 500 Series tooth is three-position indexable. Just loosen, turn and tighten for a sharp edge. Red Teeth® are more concaved, which cut through stumps at a faster rate. They are recommended in situations where there is less than 25% rock in the ground.
    SKU: 783557-1.DOS

    The Red provide faster cutting, but have lower impact resistance when compared to the green teeth. They feature a deeper dish on the concave carbide tip, making them more aggressive than the green teeth. Ideal for jobs where there is less than 25% rock in the ground.

    Benefits:

    • Cost effective – Three cutter teeth in one
    • Smoother, faster cut – The concave dish of the carbide allows teeth to sheer rather than shred. This creates a smoother motion that requires less power from the machine.
    • Saves Time – The unique design of the tooth allows you to rotate it three times. Simply loosen the nut, rotate tooth and retighten for a fresh cutting edge.
    Products specifications
    Manufacturer Greenteeth
    Series Type Greenteeth 500 Series
    SKU Number 783557-1
    Stump Grinder Size (HP) < 18
    Wrench Size 1/2"
    Nut Size 5/16" 18
    Carbide 1/2"
    Bolt Torque 180-200
    Nut Torque 20 ft lbs
    Shipping Weight N/A

    The Red provide faster cutting, but have lower impact resistance when compared to the green teeth. They feature a deeper dish on the concave carbide tip, making them more aggressive than the green teeth. Ideal for jobs where there is less than 25% rock in the ground.

    Benefits:

    • Cost effective – Three cutter teeth in one
    • Smoother, faster cut – The concave dish of the carbide allows teeth to sheer rather than shred. This creates a smoother motion that requires less power from the machine.
    • Saves Time – The unique design of the tooth allows you to rotate it three times. Simply loosen the nut, rotate tooth and retighten for a fresh cutting edge.

    What is Greenteeth®?

    Greenteeth® is an innovative tooth and pocket system that allows for each tooth to be turned up to three times before it needs to be sharpened.

    Will they fit on my stump grinder?

    Greenteeth teeth and pockets are designed to fit on any standard wheel.

    How do they work?

    The pockets bolt directly on the wheel, and the teeth fit into each pocket. The teeth can be rotated by only loosening the nut holding the tooth on.

    Are there different sized teeth?

    There are four different series offered, with each series designed to be a different size for a specific horsepower range: 1100 Series (>90 HP), 900 Series (35-90 HP), 700 Series (18-35 HP) and 500 series (<18HP).

    How do I know when to turn a tooth?

    When the tooth rounds over approximately 1/16 of an inch, it is time to turn the tooth.

    Can I sharpen the teeth?

    Yes! Greenteeth can be sharpened using a 4" x 1/4" diamond wheel.

    How do I know when to sharpen the teeth?

    When the carbide on the tooth rounds over approximately 1/16 of an inch, it is time to turn the tooth. After the tooth has been turned so that all 3 edges have been used, it is time to sharpen the tooth.

    Can I use a larger series tooth and pocket on my stump grinder?

    While any of the Greenteeth pockets and teeth will fit any standard wheel, it is recommended to follow the suggested horsepower guidelines when choosing a series to install on your stump grinder.

    What is Green-Seize™?

    Green-Seize™ is a copper based lubricant used to prevent mechanical seizing and lower torque value while achieving a greater clamp force. We recommend all pocket bolts be lubricated with Green-Seize.™

    Products specifications
    Manufacturer Greenteeth
    Series Type Greenteeth 500 Series
    SKU Number 783557-1
    Stump Grinder Size (HP) < 18
    Wrench Size 1/2"
    Nut Size 5/16" 18
    Carbide 1/2"
    Bolt Torque 180-200
    Nut Torque 20 ft lbs
    Shipping Weight N/A